Rinnai Heater ~ 1004, 556, 431, 263 LP Gas, Propane Gas, Natural Gas, LNG Gas direct Vented Convection Heaters: direct venting gas Wall Heaters ~ 84% efficient

Right Click to Disable Sound
Cosmic Genius Al's DISCOUNT Heating Miss Kitty
 
 
 

Award WinningAl's AwardsHeating Dealer

Rinnai Heater Specialist

" The King of Klarity...NOT the Titan of Tact "

 

 

Authorized Rinnai Logo Heater Dealer

Rinnai Heater & Gas Heating.

1004 ~ 556 ~ 431 ~ 263

 

The Most Efficient and Reliable Direct Vented Natural GAS and LP Gas Heaters In the World!

 

Important Consumer Notice:

The Rinnai's are the FINEST Direct Vent Natural and LP Gas Heater made in the world! We have had experience with most other Major Heating Lines, and if all of the heaters we sell were as High Quality, Reliable and Trouble-free as the Rinnai Direct Vented Heater - our Service Department would be out of business!!!

Many of you have asked 'What's the difference between using Gas and K-1/Oil Heaters?' - Here are the Answers:

  • Gas Heating is much cleaner than K-1/Oil Heating;
  • There is never a Kerosene Smell or Dangerous Environmental Tank or Fitting Leak with Gas Heating;
  • Your Rinnai Natural Gas or LP Gas Heater will NOT soot -up like the Monitor Heater so you will not have shut-down problems and expensive emergency service calls;
  • You are NOT subject to water-contaminated K-1/Oil deliveries which ruin the heater = big $$$$$$$$$$$$$$$ Repairs;
  • No water build-up in the tank or filter in the winter causing Freeze-ups and therefore Difficult and Costly Service-Calls and Repairs as with K-1/Oil Heaters just when you need the heater MOST;
  • The Rinnai Heater NEVER requires Repeated $100-200 yearly cleanings like the Monitor, or $600-750 Rebuilds every few years like Al's Heating and hundreds of other Servicers MUST do to get the Monitor Heater back working properly (of course with Al's Heating...Our Re-builds have Up-graded Parts and Proprietary Techniques ).
  • Electronic 7-Stage Burner & Whisper Quiet Convection Fan for Maximum Comfort: 84% Real-time True Efficiency using ONLY a 1" exhaust vent - NOT 40-50% Un-efficiency like Gas Log, Gas Stove or Furnace Units (what do you think goes out that 4-8" vent to the great outdoors on Inefficient Stoves and Furnaces ??? - How they lie and lie just to make a sale !!!).
I have NEVER sold a repair part for a Rinnai Gas Heater, whereas parts for Monitor Heaters fly out my door by the Thou$ands. The State Distributor told me that Rinnai is the LOWEST repair product they have ever sold! Taking into consideration all the costs for repairs and maintenance for Monitor K-1/Oil Heaters, All Customers are far better off in the long run with a Gas Rinnai Vented Heater.

 

If you are looking for an LP Gas or Natural Gas Heater for any situation, then the Rinnai Heater is absolutely the Best without question. Their Quality is #1; Their Technical Service is Great; and their Company is VERY responsive to The Consumer - What more could you ask for except for the BEST DEAL?

Al's Heating has that !!!

 

 

Please Study this Important Convection Heating Diagram Carefully:

Fresh Outside Air In - Exhaust Out using Multi-stage intake-exhaust blower.
Warm, Cozy, Safe and Comfortable Home Heat using quiet 7-Stage Electronic Burner & Fan Blower.

( The Rinnai Requires Electricity to Run the Ignitor, 7-stage Burner & convection fan blower and the Entire Heater. And for those who Still will ask if the Rinnai Heater works without Electricity - NO, NO, NO , NO, NO - get it?) It comes with a standard AC plug-in Wall Plug

 

Warranty: 2 Years Labor~5 Years Parts~10 Years Heat Exchanger - WOW !

 

The Rinnai Heater's sealed combustion system prevents the main cause of Heating-inefficiency: cold air infiltration. Because It uses outside air for combustion, no cold outside air is drawn into the house for combustion causing drafts, heat loss and that generally 'cold feeling' - and losing up to 40% efficiency waste heat out the Flue-pipe as with heaters that have a 4-5-6-7-8" vent stacks. Therefore Rinnai Heating heats your home with HIGHEST EFFICIENCY and saves you up to 1/2 on fuel over old style stack heaters at the same time.

 

 

Energy~Saver 1004 Whole-house Heater:

Unlike ordinary, old style single-stage (on/off,~hot/cold) gas heaters, the Rinnai 1004 10,500-38,000/BTUs Gas Heater (LP Gas or Natural Gas) Direct-Vent, Free-Standing Energy Saver has the ability to modulate its 7-stage Burner and Whisper Quiet Convection Fan to provide maximum

Rinnai 1004 Heater

efficiency and comfort throughout your whole home. » »The Rinnai EnergySaver furnace incorporates an electronically driven Seven-stage gas control system to help maintain an even and continuous heat-flow output for very stable home Temperature control and Gas Efficiency. » »The Direct-Vent Free-Standing Energy Saver 1004 is attractive, quiet, compact and has a SAFE Cool-to-the-touch cabinet; Led Display; Push-button Controls; Integral Humidifier; Child Safety Lock; All of these features add up to make the Rinnai Energy Saver 1004 the Finest Central Home Heating Unit in the World. » »Exceptional Energy Efficiency: The EnergySaver extended-life stainless steel heat exchanger transfers an Actual 84% of consumed gas energy to useful heat - NOT 40-50% like old fashioned stack heaters. 10 year warranty on Heat Exchanger, 5 year warranty on Parts, 2 years on Labor; available in natural gas or propane. Standard Vent Included.

 

The Rinnai 1004 does NOT have the Remote Control/Frost Proof Thermostat Available!!
VERY IMPORTANT SHIPPING NOTE: Because of the size and weight of the Rinnai 1004, Fed-Ex will ONLY deliver this Heater to a Commercial Location: Your office, local garage, or any other Commercial Store or they will bounce-back the package and charge you Freight again! Everyone knows someone in a business who will help them so this should be no big deal...Al
It is ABSOLUTELY mandatory that you use a High-quality Surge-Protector with EACH Heater!

 

The rinnai 263 heater - what a little cutie this is!

The Rinnai's Free-Standing Direct-Vent EnergySaver 263 10,000/btu model has all of the features of the larger energy saver models in a much smaller profile an design. This design allows the 263 to be installed in smaller, hard to heat areas such as bedrooms, small sun-rooms, kitchens, add-on dens and lofts. However...there is NO reduction of quality in the Rinnai 263 as it will out-perform any other Brand of gas heater in the world 2-to-1 in Performance, Economy and Comfort. The EnergySaver extended-life stainless steel heat exchanger transfers an Actual 84% of consumed gas energy to useful heat - NOT 40-50% like old fashioned stack heaters. Includes a 7 stage proportional gas valve; LED temperature; display push button controls; cool-to-the-touch cabinetry; child safety lock; Intelligent 7-stage Modulating Gas Valve and Whisper Quiet Convection Fan; integral humidifier; advanced electronic circuitry; comes with standard A Vent Kit (FOT 151) 5,500 to 11,000 BTU's 10 year warranty on Heat Exchanger, 5 year warranty on Parts, 2 years on Labor available in natural gas or propane. Standard Vent included.

It is ABSOLUTELY mandatory that you use a High-quality Surge-Protector with EACH Heater!

 

The 431 & The 556 Rinnai Mid-sized Heaters:

The Rinnai Heater 431 & 556 15,000/20,000 BTU Free-Standing Direct-Vent models include

Rinnai 431 / 556 Heater

the Standard Intelligent 7-stage Proportional Valve providing constant even heat to all areas of Medium-sized rooms, large sun-rooms and play-rooms, basements, a week-end cabin or even a small home. The EnergySaver extended-life stainless steel heat exchanger transfers an Actual 84% of consumed gas energy to useful heat - NOT 40-50% like old fashioned stack heaters.These models include LED Temperature Control Display; Whisper Quiet Convection Fan; Child Safety Lock; an economy mode for increased energy efficiency. Comes with Integral Humidifier; Cool-touch Cabinet; LED Display; Push-button Controls; Standard Vent Included.

 

 

 

It is ABSOLUTELY mandatory that you use a High-quality Surge-Protector with EACH Heater!

( The Rinnai Heater Requires Electricity to Run the Ignitor, 7-stage Burner & convection fan blower and the Entire Heater. And for those who Still will ask if the Rinnai Heater works without Electricity - NO, NO, NO , NO, NO - get it?) It comes with a standard AC plug-in

 

Rinnai Heater Specifications:
MODEL
DESIGNATION
RHFE-
1004FA/VA
RHFE-
556FA-III
RHFE-
431FA-III
RHFE-
263-FA
HEAT INPUT (BTUs) Max.    Min. Max.    Min. Max.    Min. Max.    Min.
     Natural Gas
     Propane
38,400
36,500
12,000
15,000
21,500
20,700
8,200
8,200
16,700
16,700
8,200
8,200
11,000
11,000
5,500
5,500
DIMENSIONS 1004FA/VA 556FA-III 431FA-III 263-FA
     Height
     Width
     Depth
26 3/8"
36 5/8"
13"
21 13/16"
29 1/2"
9 13/16"
21 13/16"
29 1/2"
9 13/16"
25 3/4"
16 5/8"
8 1/8"
MIN. CLEARANCE 1004FA/VA 556FA-III 431FA-III 263-FA
     Side
     Top
     Floor
2" (51mm)
10" (51mm)
0" (0mm)
2" (51mm)
12"(300mm)
0"(0mm)
2" (51mm)
12"(300mm)
0"(0mm)
2" (51mm)
12" (300mm)
0" (0mm)

ELECTRICAL
SUPPLY
REQUIRED!

120 Volts
60 Cycles
2.0 Amps
120 Volts
60 Cycles
2.0 Amps
120 Volts
60 Cycles
2.0 Amps
120 Volts
60 Cycles
47 Watts
SHIPPING
WEIGHT (Lbs.)
110 lbs.
(49.9 kg)
51 lbs.
(23.2 kg)
51 lbs.
(23.2 kg)
37 lbs.
(16.8 kg)
Carton Size 40 x 30 x 16 34 x 33 x 12 34 x 33 x 12 21 x 30 x 17
MODEL
DESIGNATION
RHFE-
1004FA/VA
RHFE-
556FA-III
RHFE-
431FA-III
RHFE-
263-FA
Average Heating Area for a Newer Home with 2x6 Walls.

20° ~ 1900sf........ 0° ~ 1750sf.......... -20° ~ 1600sf.......

20° ~ 950sf....... 0° ~ 850sf......... -20° ~ 750sf..... 20° ~ 850sf....... 0° ~ 750sf......... -20° ~ 650sf..... 20° ~ 500sf....... 0° ~ 425sf......... -20° ~ 350sf.....
In this type of Heater, the CFM (Cubic Feet per Minute) is NOT in the least important. The comfort level of the Rinnai Heater depends on a Regular, Light and Constant movement of Heated Air around the entire Living Space in a 'Convection Egg-beater Pattern' giving Un-beatable Comfort over any other Heater throughout the Entire House!
It is ABSOLUTELY mandatory that you use a High-quality Surge-Protector with EACH Heater!

 

For uneven floor installations, leveling feet come standard on all EnergySaver models.

 

The Rinnai Heater Requires Electricity to Run the Ignitor, 7-stage Burner & convection fan blower and the Entire Heater. And for those who Still will ask if the Rinnai works without Electricity - NO, NO, NO , NO, NO - get it? It comes with a standard AC plug-in Electrical Plug

 

Installation: Each Energy Saver Rinnai Heater comes complete with an easy to install Horizontal Direct-Rinnai Wall VentVent Double-Walled Venting kit. Simply drill a 3" hole through the wall; Insert Rinnai's special direct vent Double-Walled tube, adjust it to the wall thickness & mount the outside wall cap plate to the tube. Then connect the Rinnai Direct-Vent Free-Standing High Efficiency Heater and be prepared to be Toasty-warm ALL winter and for Years to come!!!

 

 

One 'HVAC Internet Dealer' strongly recommends' that you have your Rinnai Heater 'Professionally Installed' - ARE THEY NUTS ???

The way most Installers rape the homeowner it usually costs you between $400-1000 to have the Plumber or Gas Company do this simple job that you can do (it's always nice to have a friend to help) of cutting a 3" hole in the wall; inserting the vent; running the 1/2" soft-copper tubing to the heater from the tank (depending on Codes) and that is all there is to it. Then the Gas Company will send a man to hook up each end and pressure test the system for usually $75-100...NOT $400-1000!

These greedy Installers want to make this seem like some kind of magic when in reality it is just hokey-pokey on their part to lift your wallet right out of your pants - Don't let them do it !

 

 

Venting Accessories and Options:

All Rinnai's come with the Standard 'A' Vent . Here are the Additional Available Vents:
Vent Wall Vent Sizes
From >To
Wall Hole
Diameter
Application Price:
S/FOT-150
3 > 4 1/2"
3"
(76 mm)
Thin Walls
Mobile Homes
$86.00
A/FOT-151
4 1/2 > 9 1/2"
3"
(76 mm)
Wood Walls $88.00
B/FOT-152
9 1/2 > 15 3/4"
3"
(76 mm)
Wood/Brick $116.00
C/FOT-153
15 3/4 > 23 5/8"
3"
(76 mm)
Brick/Block $116.00
D/FOT-154
23 5/8 > 31 1/2"
3"
(76 mm)
Special $150.00
All Prices subject to Handling and Shipping Costs.

 

Important Notice:

Exhaust Venting Must be installed Horizontally using the Factory Wall Vent - NOT up through the roof or into an exiting chimney or other brand flu-pipe vent. You may use an Optional Extension Kit to go up and OUT or sideways and OUT. BUT - The Factory Exhaust Flu-pipe MUST be vented Horizontally with or without with the extension kits - again installed ONLY Horizontally Rinnai Vent - NOT up or down!

 

Extension Venting Kits are available for placing Heaters on inside walls, below grade and in basements to vent up and connect to the Rinnai Heater Factory horizontal discharge vent. Don't get cute with this Wall-vent...It MUST vent horizontally or you will destroy the Heater!

 

 

 

Extension Kits
Telescoping Length
Telescoping Length
Telescoping Length
Rinnai 263/431/556
11-1/2~20-1/2"/FOT-155
21-40"/FOT-156
60-80"/FOT-157
Cost:
$75.00
$105.00
$130.00
Rinnai 1004
11-1/2~20-1/2"/FOT-102
21-40"/FOT-103
60-80"/FOT-114
Cost:
$87.00
$106.00
$145.00
Rinnai 263/431/556 - 90° Elbow FOT-158 / $39.00
Rinnai 1004 90° Elbow FOT-115 / $49.00
18" Flexible Elbow-pipe for going through Walls for 263/431/556 - FOT-190 / $60.00
All Prices subject to Handling and Shipping Costs.

Maximum Extension Total Venting Length is 13' with 2 Elbows in any direction except down!

 

No Rinnai Repair Video Needed !

Unlike other Heaters...The Rinnai's need no Major service or Re-builds and that is why we are are NOT producing a Video for them - how wonderful...:)

 

( The Rinnai Heater Requires Electricity to Run the Ignitor, 7-stage Burner & convection fan blower and the Entire Heater. And for those who Still will ask if the Rinnai Heater works without Electricity - NO, NO, NO , NO, NO - get it?) It comes with a standard AC plug-in Wall Plug

 

 

Very Important Notice:

Please do NOT call if you are looking for an UN-VENTED gas heater as that is NO different than putting all your family into your garage, shutting all the doors, starting up your car and then laying them down for a very long and permanent sleep - Good Luck!

More and more States are making Un-vented Heaters ILLEGAL as they are in fact dangerous to the Health of you, your family, your pets, etc. ALL un-vented heaters emit toxic fumes, vapors, bad odors, stain the walls, ceilings and drapes. The excess moisture emitted into the house with an un-vented heater can cause severe mold and mildew problems. If you want to buy an UN-vented heater, you should first put your hand in your pants to see how small your brain is!!!

PS:

I have been getting more and more calls from people who unsuspectingly were sold Un-vented heaters by idiot money-grubbing retailers. They have had gallons of water and moisture exhausted into the house by indoor combustion; fumes and odors; sore throats and coughing; mold and mildew problems; and very poor heating performance - Don't be one of these sorry ones - ONLY purchase a Rinnai Vented Gas Heater!

 

 

See Al's Other Sites

'Miss Kitty' Pics

 

 

Links of Interest:

 

(All Editorial Comments and Experiences are those of the Author - Alvah C. Luce / Cosmic Genius)

 

 

Rinnai Heater LP Gas, Propane Gas, Natural Gas

(All Editorial Comments and Experiences are those of the Author - Alvah C. Luce / Cosmic Genius)